How to configure the APN for a Lekemi 905 GPS tracker SIM card?

Below is a guide for configuring the Lekemi 905 GPS tracker.

For more details, we recommend referring to the device's user manual.

Follow the steps below to configure the device:

1. Set the administrator number (usually your mobile number): This will be stored by the device as the number to accept commands from and respond to.
   • SMS command: admin123456 + space + your mobile number

   • You should receive an SMS: admin ok

     Enable GPRS:

   • SMS command: gprs123456

   • You should receive an SMS: gprs ok

     Set the APN:

   • SMS command: Apn123456 + space + TM

     Check the LED:

   • If the device's LED is solid green, the GSM connection has been established.

   • If the device's LED is solid blue, the GPS connection has been established.

     Factory reset:

   • If the configuration doesn't work, you can reset the device to factory settings.

   • SMS command: begin123456 or reset123456

     Request the position:

   • SMS command: G123456#
   • You should receive an SMS with a Google Maps link showing the device's location.

IMPORTANT: The above commands are provided as examples. Devices may have configuration changes made by the manufacturer. We recommend consulting the device's user manual for the correct commands, as they may differ in letter sequence or capitalization.