How to configure the APN for a SIM card with a fixed public IP?

To ensure the correct operation of the device, we recommend performing the following configurations:

  1. Insert the SIM card into the device.
  2. Set the APN with the following parameter: JTFIXEDPUBLIC.
  3. If asked for a username and password, leave the fields empty.
  4. Enable data roaming on the device.
  5. Enable data connection.

Below are additional parameters that might be useful (but can be ignored if not required):

  1. SMS Service Center: 447797704000
  2. MCC: 234
  3. MNC: 50
  4. PLMN Operator Code: 23450

Note: If the APN configuration needs to be done via SMS, make sure the command is received correctly by the device. When sending SMS from a different operator to a Things Mobile SIM card, remember to prefix the Things Mobile number with "00" or "+" (e.g., 00882... or +882...). Similarly, when sending SMS from Things Mobile to another operator, use "00" or "+" with the international dialing code of the country (e.g., 0039 or +39 for Italy).

If you encounter any issues with the procedure above, we suggest to contact our Support Team writing to support@thingsmobile.com

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.